Product
specifications Huawei ME60
The
exchange capacity of
345Gbps/950Gbps
The
forwarding performance of 225Mpps
Number of
slot 8 slot, including 2 MPUs (2 1:1backup), LPUs and
4FICs
Dimensions
of 442mm × 650mm × 220 mm (AC 5U)
442mm × 650mm × 175 mm (DC 4U)
Maximum power 1000W
Full with weight
39Kg (DC)
49Kg (AC)
IPv4
supports Static routing, RIP, OSPF, IS-IS, BGP-4 routing protocol, all theports in the routing oscillation complex line speed forwarding routingenvironment
IPv6 fully support the IPv4 and IPv6 dual
stack;
Support
rich IPv4 to IPv6 transition technology: manually configure the tunnel,automatic tunnel, 6to4 tunnel, GRE tunnel, ISATAP tunnel;
Support
IPv6 static routing, support BGP4/BGP4+, RIPng, OSPFv3, ISISv6 dynamic routing protocol;
Support
ICMPv6 MIB, UDP6 MIB, TCP6 MIB, IPv6 MIB etc.
MPLS
supports MPLS TE, MPLS/BGP VPN, with
RFC2547bis protocol;
Support
three kinds of cross domain implementation;
Integrated
support and Internet service; support Martini, Kompella MPLS L2VPN
based on VPN technology, two layer and other support VPLS/VLL,support heterogeneous media internet;
Support VPN multicast.
Two layers
of IEEE supporting 802.1Q, IEEE802.1ad, IEEE 802.1D, IEEE802.1w, IEEE 802.1s and other related protocols, support for VLANpolymerization (Super VLAN), to support the filter list, the MAC address and port support based on 1483B
The
reliability of IP/LDP/VPN/TE/VLL fast reroute technology, IP/TE automatically re routing, IGP/BGP/ multicast routing convergence, Virtual Router Redundancy Protocol (VRRP), rapid ring protection protocol (RRPP),IP TRUNK backup link sharing, rapid detection of BFD, MPLS/Ethernet OAM,routing protocol / port
/VLAN Damping protection mechanism;
Support PW redundancy, E-Trunk, E-STP;
Provide the
software hot patch technology, software upgrade;
The passive backplane design;
Route
processing module, key components of power supply redundancy backup, no single point of failure machine;
Support for
hot backup switching based on state support, graceful restart(GR), do not stop forwarding (NSF), don't interrupt routing (NSR), ISSU;
All components can be hot plugged.
QoS each circuit
board can provide advanced scheduling and congestion avoidance technique;
Provide traffic policing and traffic shaping function accurately;
Provides
definitions of complex rules of function, support stream fine-grainedidentification;
Support
MPLS HQoS, MPLS VPN, VLL and full guarantee for PWE3 QoS;
DiffServ
and MPLS TE based
DS-TE, support 8CT (Class Type), support for TE tunnel QoS.
Multicast support IGMP v1/v2/v3 protocol;
Static multicast configuration, support multicast routing protocol for
PIM-DM/SM/SSM, MSDP, MBGP; support multicast CAC;
To support interoperability between multiple multicast protocol;
To support multicast strategy, including the strategy to deal with multicast routing protocols and multicast forwarding;
Support QoS multicast, IPOE access user multicast replication;
Provide a switched network and a circuit board level two multicast replicationfunction, achieve optimal multicast efficiency.
Security
support ACL packet filtering;
Support
URPF;
Support
GTSM;
Support for
DHCP Snooping;
Support the anti ARP attack, DOS attack defense;
Support the
MAC address restriction;
Support
SSH, SSH v2;
Support
IPSEC;
MAC and IP binding;
Support
NetStream.
The
environmental relative humidity 0 ~ 95% (no condensation)
Working
environment temperature long-term working temperature: 0~45 ℃
Short term operating temperature: -5~55 ℃
more information ,you can visit http://www.3anetwork.com/cisco-catalyst-2960-switches-price_c39
没有评论:
发表评论